File:Ss-1.svg: Difference between revisions

Revision as of 05:23, 27 March 2026

Solar Cell System with Charge Controller and Battery

This version seems to have an inverted output from the controller chip that needs to be fixed.

Transistor Q1 should probably be PNP instead of NPN.

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Dimensions	User	Comment
current	22:55, 28 March 2026	1,260 × 765 (365 KB)	Rational Point (talk \| contribs)	fixed upside down diode
	21:52, 27 March 2026	1,260 × 765 (358 KB)	Rational Point (talk \| contribs)	specified component values; added lamp and switch
	06:09, 27 March 2026	1,260 × 765 (340 KB)	Rational Point (talk \| contribs)	fixed inverted output, layout
	16:08, 25 March 2026	1,260 × 765 (332 KB)	Rational Point (talk \| contribs)	Solar Cell System with Charge Controller and Battery

You cannot overwrite this file.

The following page uses this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Short title	SVG Image created as ss-1.svg date 2026/03/28 15:52:54
Image title	Image generated by Eeschema-SVG
Width	355.6000mm
Height	215.9000mm

Revision as of 05:18, 27 March 2026 view source Rational Point (talk \| contribs) 539 edits Errata ← Older edit		Revision as of 05:23, 27 March 2026 view source Rational Point (talk \| contribs) 539 edits →‎Summary Newer edit →
Line 3:		Line 3:

	This version seems to have an inverted output from the controller chip that needs to be fixed.		This version seems to have an inverted output from the controller chip that needs to be fixed.

			Transistor Q1 should probably be PNP instead of NPN.